1 Attention!\n\n%s is not the program you have allowed but just a program with the same name. If you have recently upgraded %s click Allow It, otherwise click Block It to block the activity and examine the application.
2 Attention! You have the third-party firewalls installed on your computer.\n\n%s\nWe strongly recommend that you uninstall all other firewall software before starting <PRODUCT>.\n\nNote: If you have simply exit your firewall and disabled its run during system startup, the firewall services will still remain in memory.\n\nRunning several firewalls simultaneously most likely will result in the following issues: \n- BSODs, system hand-up, unexpected reboots.\n- All applications will have unrestricted access. Ports, applications, protocols, etc. will not be blocked.\n- All applications will be blocked and no site can be opened.\n- Operating system will not start.\n- Other errors and problems are also possible causing system instability and decreasing protection level.\n\nClick Details to see what particular services or drivers from other firewall software vendors are currently running on your system.
3 Network: %d.%d.%d.%d/%d.%d.%d.%d (%s)
4 IDS_LAN_STR1_LOCAL
5 IDS_LAN_STR2_LOCAL
6 IDS_INFO_STR1_INTERNET
7 IDS_INFO_STR2_INTERNET
8 Local
9 Internet
10 Local Area
11 Internet
12 Host or Subnet Address
13 Area
14 NetBIOS
15 ICS
16 Trusted
17 Count
18 Current Session
19 Today
20 All
21 Event Log for %s (%s)
22 Click Show Detailed Log for more information
23 &Show Log Preset
24 Show &Detailed Log
25 Create &New Filter
26 This plug-in is already installed
27 Events reported
28 Remote Address
29 Local Address
30 Action
31 Information About %s
32 Last Event
33 All NetBIOS communications (files and printer sharing) to and from this network are allowed.
34 Warning! All communications to and from this network are allowed.
35 All NetBIOS communications for this network are blocked. All other communications will be controlled according to the application and system rules.
36 Save New Configuration As
37 There is no rule defined for this process
38 Cannot start plug-in
39 Changes will apply only after reboot
40 Rule
41 Custom Rule
42 Restricted Host
43 Restricted Port
44 New Rule
45 IP Protocol Rule
46 The rules for this application have already been defined
47 Configuration file %s is broken.\nDo you want to use the backup copy?
48 Cannot open configuration file %s.\nDo you want to use the backup copy?
49 Cannot restore configuration from backup.
50 Configuration file %s is broken.
51 No active plug-ins.
52 Switching <PRODUCT> to the Normal mode decreases your system security level and makes it visible to the intruders. Do you still wish to change the firewall mode?
53 TCP connection direction is not specified.
54 Special Offer:
55 Take advantage of our special offer today and receive a 50% discount off your purchase. To learn more click Buy with discount.
56 Are you sure you want to remove rules for application '%s'?
100 Cannot initialize OLE. Make sure that the OLE libraries are of the correct version.
101 <PRODUCT>
102 Exit and shutdown <PRODUCT> Service
103 Maximum
104 Normal
105 Low
106 Disabled
107 Warn about new application components that are not located in application folder.
108 Warn about all changed or added application components.
109 Warn about changed or added application executables only.
110 Do not display warnings (not recommended).
111 Import Configuration
112 The wizard has detected the configuration settings file from previous <PRODUCT> version. Specify whether you want to import these settings.
113 Anti-Leak Control Settings
114 Rules Autocreation
115 <COMPANY> presents rules autocreation and invites you to participate in product quality improvement.
116 Component Control
117 <PRODUCT> searching for installed applications and building Component Control database.
118 Are you sure you want to disable <PRODUCT> self-protection? This feature protects the program's internal files and critical objects from being damaged or modified and disabling it may severely impact overall system security.
119 (Entertainment Mode)
120 WARNING! Products with known stability issues detected.
121 Some of the installed applications can cause system stability issues.
200 Where the specified protocol is
201 Where the specified direction is
202 Where the specified remote host is
203 Where the specified remote port is
204 Where the specified local host is
205 Where the specified local port is
206 Where the specified time interval is
207 Component
208 Description
209 Details
210 Status
211 New
212 Modified
213 Where the local port is equal to the remote port
214 Where the local port is equal to the remote port
218 Allow all traffic
219 Stop all traffic
220 Allow it
221 Block it
222 Reject it
223 Log it
224 Report it
225 Bps
226 Run application
227 Mark rule as High Priority
228 Do not log this activity
300 New rule
301 or
302 and
303 Where the direction is
304 Where the protocol is
305 Where the local port is
306 Where the remote port is
307 Where the remote host is
308 There are already rules defined for this application. Click No to move them to the custom folder, click Yes to reset the rules and load them from a template.
309 Outbound
310 Both
311 Undefined
312 TCP
313 UDP
314 ICMP
315 or
316 Are you sure you want to block this application?\nAny rules created for this application will be deactivated.
320 Options
321 The password you typed is incorrect.
322 Warning! The password is empty.
323 Passwords you entered do not match.
324 Trusted applications
325 Blocked applications
326 Executable files
327 Active time interval is
328 Password Error
331 Administrator approved
332 Disable
333 Enable
334 Prompt
335 High security
336 Low security
337 You must select at least one criterion from the list to create a rule.
338 Please select 'Allow it' or 'Block it' action.
339 Some information is missing or incorrect. Please correct the highlighted items.
340 Please click the items marked red to correct missing or incomplete values.
341 Please select protocol first.
342 Inbound
343 Select remote port
344 Remove this rule?
345 Copy of
346 New rule
347 Partially allowed applications
348 This rule is currently turned off.
351 You can only drop executable files here
358 No rules selected.
359 Referrers
362 Start Time
363 Up Time
364 Sent
365 Received
366 Remote Addr
367 Protocol
368 Local Port
369 Direction
370 Application
371 Remote Port
372 Remote Host
373 Reason
374 Line %d: Unexpected token while looking for the application (%s)
375 Line %d: Invalid application specified (%s)
376 Line %d: Invalid token specified (%s)
377 Line %d: Invalid DefaultState value specified (%s)
378 Line %d: Invalid rule name
379 Line %d: Invalid Protocol value specified (%s)
380 Line %d: Invalid Direction value specified (%s)
381 Cannot add rule %s because it is incomplete
382 Line %d: Protocol is not specified, thus the port cannot be selected
383 Line %d: Invalid Port value specified (%s)
384 Create Rules Using Preset
385 Custom...
386 Line %d: Invalid Host address specified (%s)
387 Select an item from the list to proceed.
388 Select a column header to proceed.
389 Description
390 Unknown
391 Data
392 Time
393 Description
394 Listening
395 Do Not Log This Activity
408 and packet type is
420 Allow most
421 Block most
422 <R_WIZARD>
423 Allows all communications that are not explicitly blocked.
424
425
426 Blocks all communications that are not explicitly allowed. You must create firewall rules that allow communications for each application that requests Internet access to function properly.
427
428
429 <GUIDES>
430
431
433 &Ungroup
434 Incoming
435 Outgoing
436 Open Ports
437 Established
438 Allowed
439 Blocked
440 My Internet
441 &Application
442 &Local Port
443 &Remote Host
444 R&emote Port
445 &Ungroup
446 &Direction
447 Block Reason
448 &Block reason
449 Sort &Ascending
450 Sort &Descending
451 No Sort Criteria Available Here
452 No Group Criteria Available Here
453 All Connections
454 Disconnected
455 No value selected for filter
456 Application requested an inbound connection with
457 Blocks all inbound and outbound communications
458
459
460 Stop All mode
461 Plug-Ins
462 DNS Cache
463 Root
464 Date/Time
465 Event
466 New record
467 Cache hit
468 Plug-In
469 Module
470 IP
471 Status
472 Popup windows
473 <PRODUCT>
474 Fw 777777, Web 777777
475 =Don't translate this message string=
476 Fw %d, Web %d
477 Domain Name
478 Error loading driver %d
479 Driver initialization error %X@%d
480 Cannot load plug-in DNSCACHE.DLL.
481 Local Address
482 Where the local host is
483 Lo&cal Host
484 Local Host
485 Content Blocking Settings
486 Ad Blocking Settings
487 Cannot load plug-in HTTPFILT.DLL.
488 Cannot load plug-in ADBLOCK.DLL.
489 Library %s is not a valid <PRODUCT> plug-in.
490 The following application requested an outbound connection
491 Remote host requested an inbound connection
492 Log
493 Web
494 Ads
495 Content
496 Action
497 URL
498 Details
499 Keyword
500 Block cookie
501 Block ActiveX object
502 Block Java applet
503 Block JavaScript
504 Hide Referrers
505 Kill Pop-up window
506 Block host
507 Block content
508 Block by string
509 Block by size
510 Block by link
511 Block request
512 No cache answer
513 Block image
514 No rule presets found.
515 Cannot load library %s.
516 You must select an action.
517 The specified rule does not define an action for the <PRODUCT> to perform on the specified connection.
518 &Show
519 &Hide
520 Create rule for %s
521 Disable mode
522 Disables the firewall and allows all communications unrestricted access.
523
524
525
526 Execute plug-in options
527 Execute plug-in options
528 Execute plug-in options
529 Execute plug-in options
530 Execute plug-in options
531 Execute plug-in options
532 Execute plug-in options
533 Execute plug-in options
534 Execute plug-in options
535 Select local address
536 Application is requesting an inbound connection
537 Application is requesting an outbound connection
538 Started
539 Stopped
540 Monday
541 Tuesday
542 Wednesday
543 Thursday
544 Friday
545 Saturday
546 Sunday
547 Everyday
548 Business days
549 Weekend
550 All
551 Never
552 Invalid time interval
553 Create an ICMP rule
554 From %d:%d:%d To %d:%d:%d
555 &Allow this type
556 &Block this type
557 &Create rule
558 The system requests ICMP
559 ICMP Type
560 Allow activity for application
561 Block activity for application
562 Remove this read-only rule?
563 Modify this read-only rule?
564 Cannot find application for this connection.\n<PRODUCT> cannot create this rule.
565 Select Target Folder
566 %s requesting an outbound connection with
567 Please enter password to exit <PRODUCT>.
568 Password you have entered is incorrect. Please re-enter password to exit <PRODUCT>.
569 Trusted Zone
570 Type
571 State
572 Reported
573 NetBIOS Address
574 The language changes will take effect next time you start <PRODUCT>.
575 Create rule for %s
576 and type is
577 Internet control message protocol (ICMP)
578 Gateway-gateway protocol (IGMP)
579 Transmission control protocol (TCP)
580 Exterior gateway protocol (GGP)
581 PARC universal packet protocol (PUP)
582 User datagram protocol (UDP)
583 Host monitoring protocol (HMP)
584 Xerox NS IDP (XNS-IDP)
585 "reliable datagram" protocol (RDP)
586 MIT remote virtual disk (RVD)
587 Default
588 Application:
589 Remote port:
590 Remote address:
591 <PRODUCT> Report
592 Clear all log files and log windows?
593 Copy Attack &Type
594 Copy &Date/Time
595 Copy &IP
596 Copy &Ports
597 Copy &DNS
598 All protocols
599 Unknown Protocol
600 Other...
601 Free License
602 Free
603 Unregistered Trial
604 Free Trial
605 Single user
606 Stateful Inspection
607 Activate Stateful Inspection
608 Closing in %d secs
609 Close
610 Business days\nWeekend\nEveryday\nMonday\nTuesday\nWednesday\nThursday\nFriday\nSaturday\nSunday
611 Allow NAT Packets
612 Allow NetBIOS Traffic
613 Trusted Zone
614 Lifetime Upgrade
615 Ignore Component Control
616 Macro: %s
2000 Would you like to stop service and exit application?
2001 Would you to clear all counters?
2002 Are you sure you want to disable logging?\n\nThis will prevent you from further system network activity history analysis.
32771 Changes miscellaneous view settings
32772 Go to Outgoing Connections folder\nOutgoing Connections
32773 Go to Allowed folder\nAllowed Connections
32774 Go to Blocked folder\nBlocked Connections
32775 Show or hide the folder bar\nToggle FolderBar
32776 Create or modify the rules\nRules
32777 Change the program settings\nOptions
32778 Go to My Internet folder\nMy Internet
32779 Modify output columns\nColumns settings
32786 Modify output columns\nColumns settings
32795 Change the layout settings
32798 Group items by...\nGroup by
32799 Filter connection history by selected event\nFilter by selection
32800 Filter the connection history by the time interval\nFilter by time
32817 Change the general settings
32818 Change the application settings
32819 Change the system settings
32820 <CHANGE>
32821 Manage plug-ins and their settings.\nManage Plug-Ins
32824 Remove the current event filter\nShow all events
32827 Select the Allow most mode
32828 Select the Block most mode
32829 <SELECTRW>
32830 Select the Stop All mode
32836 Quits the application and prompts to save changes\nExit
32837 Show or Hide <PRODUCT>
32838 Filter the connection history\nFilter
32839 <CURRENT>
32840 Show window Always On Top
32841 Toggles Always On Top mode
32842 Select the Disable mode
32855 Configure plug-ins\nPlug-Ins
32858 Display file properties
32859 Save all logs in text format
32860 Copy current line
32861 Check for newer version\nUpdate
40002 Displays the documentation table of contents.
40005 Enables automatic check for <PRODUCT> updates
40006 Blocks the application activity until reboot.
40008 Allows the application activity only until reboot.
40019 Change selected plug-in settings
40020 Clear all log information
40023 Reset all counters
40025 Register your <PRODUCT> copy
40031 Start the <PRODUCT> Log Viewer\n<PRODUCT> Log Viewer
40033 Advanced view settings
40034 Test My PC Online
40035 Test My PC Online\nTest your security online at www.pcflank.com
40036 Exit <PRODUCT> and Shutdown running services \nExit
40038 Renew My Subscription
40043 Download <COMPANY> News
40044 Download Plug-Ins Information
40045 Download company news
40047 Show what's new\nShow what's new\n
40048 Show Log Viewer
40050 Enable Logging\nEnable Logging
40052 Check for available updates of spyware signatures
40053 Scans a computer for spyware\nRun System Scan
40054 Enable Quick Tune plug-in in Internet Explorer
57604 Save the active configuration under a different name\nSave As
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57631 Open this document
57632 Clear selection\nErase
57633 Clear everything\nErase All
57634 Copy selection to the Clipboard\nCopy
57635 Cut selection and to the Clipboard\nCut
57636 Find the specified text\nFind
57637 Paste Clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with specified substring\nReplace
57642 Select the entire document contents\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57653 Split the active window into panes\nSplit
57664 Display program information, version number and copyright\nAbout
57665 Exit <PRODUCT> and keep services running\nExit
57669 Display context help for buttons, menus and windows\nHelp
57670 Display <PRODUCT> help file
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
59397 Arrange icons on a grid.
59408 Display items using small icons.\nSmall Icons
59409 Display items using large icons.\nLarge Icons
59410 Displays items in a list.\nList
59411 Displays detailed information about each window item.\nDetails
59412 Arranges icons in a grid.
59413 Sorts the icons alphabetically.
61184 Change the window size
61185 Change the window position
61186 Minimize window to an icon
61187 Enlarge window to the full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
61202 Restore window to the normal size
61203 Activate Task List
63029 Registered to %s
63030 This is unregistered copy for evaluation use only.
63031 (Unregistered)
63032 Specified application is already on the list
63100 Firewall Rule Report
63101 %s inbound connection for %s from %s to port %s
63102 %s outbound connection for %s to %s port %s
63103 Allow
63104 Block
63179 No spyware was detected
63200 News
63201 Latest security and product news flash at <COMPANY>!
63202 Plug-In News
63203 Extend functionality of your <PRODUCT> with the latest plug-ins available.
63204 Plug-In News
63205 <COMPANY> team recommends you to try out the new plug-ins available for <PRODUCT>.
63250 Click here to find out more...
63251 Click here to learn more...
63252 You have disabled <PRODUCT>.\n\nYour system from now on is not protected against unsolicited network activities.
64000 Searching for networks\nCreating the Component Control database
64001 Component
64002 Description
64003 %d applications found so far
64004 N/A
64005 Configuration files (*.cfg)\n*.cfg\n
64006 Save Configuration As
64007 Skip Configuration
64008 Are you sure you want to exit the wizard?
64009 <PRODUCT>
64010 Components for %s
64011 Specify components that are allowed for use with application. <PRODUCT> will not not warn you about these components.
64012 Are you sure you want to exit the installation?
64013 Your system is trying to communicate via %s protocol
64014 Process attempts to access rawsocket
64015 Process path
64016 Other...
64017 Allow rawsocket access for %s
64018 (Invert)
64019 Module name
64020 Browse...
64021 from
64022 to
64023 for
64024 New configuration created
64025 Configuration saved to %s
64026 Configuration loaded from %s
64027 <SETTO>
64028 Disable mode
64029 Allow most mode
64030 <R_WIZARD>
64031 Block most mode
64032 Stop all
64033 Password protection disabled
64034 Password protection enabled
64035 Password was changed
64036 Startup mode set to Normal
64037 Startup mode set to Background
64038 Startup mode set to Disabled
64039 %s plug-in removed
64040 %s plug-in added
64041 %s plug-in stopped
64042 %s plug-in started
64043 Startup Configuration Wizard
64044 Automatic Rules Creation
64045 Rules for %s are automatically created based on presets.
64046 Click here to edit rules
64047 Rules Presets Update
64048 New rules are downloaded.
64049 Cannot register client computer on console. License limit exceeded.
64050 Invalid <COMPANY> Publisher Service port value.
64051 Invalid <COMPANY> Update Service port value.
64052 Invalid IP address.
64053 Error
64054 Cannot save connection settings.
64055 Rules for this application will be automatically reapplied next time the application requires network access. If you do not want rules to be created automatically for this application, you should define them manually.\n\nDo you want to delete the rules for this application?
64056 This rule will be automatically reapplied next time the application requires this type of network access. If you do not want the rule for this type of connection to be created automatically for this application, you should define the corresponding rule manually.\n\nDo you want to delete the rule?
64057 Cannot check for spyware
64058 From %s till %s
64059 Configuration Wizard
64060 Infected by: %s
64061 Known applications: %d
64062 Searching for networks\nSearching for network-enabled applications\nCreating the Component Control database
